Imprimir 
TD2-1000
- Total installed power: 76kw.
- Machine weight: 14.500kg.
- Machine size: 3.100×1.700.
- Installation size: 4.500×5.300.
- Lathe turning: Up to Ø1000.
TD2-800
- Total installed power: 65.5kw.
- Machine weight: 11.000kg.
- Machine size: 2.800×1.500.
- Installation size: 4.650×5.300.
- Lathe turning: Up to Ø800.
- CNC: FANUC Series oi-TF.
- Headstock motor: 37Kw, 240Nm. Output torque 3.024Nm, 300rpm max. Safety brake.
- “X” Slides motor:12Nm, belt transmission, reduction 1:44. Ball screw 50×10, Spindle torque 17.3Nm. Maximum speed 15m/min.
- “Z” Slides brake motor: 12Nm, belt transmission, reduction 1:44. Ball screw 50×10, Spindle torque 17.3Nm. Maximum speed 15m/min.
- Tooling: SANDVIK Capto C6 or C8.
- Binder: Ciylinder 0320, 6 bar, 4.825 kgf. 10 bar, 8.042 kgf.
- Binder Floating System.
- Oil mist suction Unit: ABSOLENT A MIST 20.
- Fairing: pneumatic automatic doors, photoelectric barriers 30 mm
- Cooling fluid: Coolant 70 bar.
- Lubrication
‣ Automatic grease unit: headstock bearings and ball screw main bearings.
‣ Grease kit: slides rollers
‣ Lifetime grease: ball screws 2º support
Disc lathe options:
- Laser equipment:
‣ Check that the workpiece clamped on the chuck is the programmed one, by checking the diameter.
‣ Check that the workpiece is securely clamped. It’s verified that when turning one turn there is no excessive runout It’s possible to programme the runout. - In the case of robot work, check that there is a workpiece on the chuck.
- Probe Unit:
‣ Check the tool’s wear.
‣ Check the tool’s breakage.
